Magnesium Ribbon Anode

Product Detail

Magnesium Ribbon Anode

Brief Introduction
  The conventional magnesium cast anode is an economical and dependable source of current in soil and water of comparatively low electrolytic resistivity. However, at higher resistivity, the problem becomes supplying enough current for protection without installing an excessive weight of anodes. In this case magnesium ribbon anodes offer minimum resistance to earth per unit weight of anode installed.

 

Application

Printing plate with etching;

Stamping 3C auto parts Mg battery shell;

Decorative sheet construction;

Military industry;

Batter anode for sea water;

Instrument and meter shell

 

Chemical Composition of Magnesium Ribbon Anode

Mn	Zn	Al (max)	Cu (max)	Ni (max)	Fe (max)	Si (max)	Impurities		Mg
							Each	Total
0.50-1.3	------	0.01	0.02	0.001	0.03	---	0.05	0.30	Bal.
0.20 min	0.7-1.3	2.5-3.5	0.01	0.001	0.002	0.05	0.05	0.30	Bal.

 

Specification of Magnesium Ribbon Anode

Section (inch)	3/8X3/4± 0.015 (1/8" corner)
Diameter of core (inch)	0.135
Core eccentric (inch)	<1/16
Weight (lbs /feet)	0.243
Standard coil length (feet)	1000
Coil weight (lbs)	243 (110kg)











DEYUAN is equipped with a comprehensive magnesium ribbon anode factory, which is one of the professional and well-known such manufacturers and suppliers in China. Don't hesitate to buy China OEM magnesium ribbon anode with us.